Linux: To Compile wpa_supplicant on Debian 3.1 Sarge

I was using good old Debian Linux 3.1 Sarge when I found out Sarge's wpasupplicant couldn't work well with ndiswrapper-supported Windows network drivers. So I set out to compile wpa_supplicant on my own. First, I installed the following development packages.

• gcc-3.4
  
• libssl0.9.7
  
• make
  

Then, I downloaded the wpa_supplicant source (wpa_supplicant-0.6.9.tar.gz) from http://hostap.epitest.fi/wpa_supplicant. I unpacked the source and read the README files.

tar xzvf wpa_supplicant-0.6.9.tar.gz
cd wpa_supplicant-0.6.9/wpa_supplicant

I went into the wpa_supplicant subfolder and created .config to customize my build. The following is the contents of my .config:

CONFIG_WIRELESS_EXTENSION=y
CONFIG_DRIVER_HOSTAP=y
CONFIG_DRIVER_ATMEL=y
CONFIG_DRIVER_WEXT=y
CONFIG_DRIVER_RALINK=y
CONFIG_DRIVER_NDISWRAPPER=y
CONFIG_DRIVER_IPW=y
CONFIG_IEEE8021X_EAPOL=y
CONFIG_EAP_MD5=y
CONFIG_EAP_MSCHAPV2=y
CONFIG_EAP_TLS=y
CONFIG_EAP_PEAP=y
CONFIG_EAP_TTLS=y
CONFIG_EAP_GTC=y
CONFIG_EAP_OTP=y
CONFIG_EAP_SIM=y
CONFIG_EAP_AKA=y
CONFIG_EAP_PSK=y
CONFIG_EAP_SAKE=y
CONFIG_EAP_GPSK=y
CONFIG_EAP_PAX=y
CONFIG_EAP_LEAP=y
CONFIG_EAP_IKEV2=y
CONFIG_EAP=y
CONFIG_WPS=y

Then, I began compilation by running make.

make

The compilation was successful. I installed wpa_supplicant with the following command.

make install

The following files are copied to the system.

/usr/local/sbin/wpa_supplicant
/usr/local/sbin/wpa_passphrase
/usr/local/sbin/wpa_cli

Linux: Connecting to Wireless Networks with wpa_supplicant

Connecting to a wireless network in Linux is easy with wpa_supplicant. If you haven't, install the wpasupplicant package first. Also, install wireless-tools.

Of course, the driver for the wireless adapter has to be installed and loaded too. You can either use Linux native driver or Windows NDIS driver for your wireless device. The Linux kernel itself provides native driver modules for popular wireless chips. Alternatively, you can use a Windows driver in Linux with the help of ndiswrapper. I prefer using ndiswrapper to enable my wireless adapters. Once ndiswrapper is configured correctly, the following command will load the driver for the wireless network adapter.

modprobe ndiswrapper

In order to be able to control wpasupplicant with wpa_cli and wpagui, you should add useself to the netdev group.

adduser username netdev

To automatically have wpasupplicant take care of wireless connections, you should edit two files, /etc/network/interfaces and /etc/wpa_supplicant/wpa_supplicant.conf. The following is a sample /etc/network/interfaces file.

auto lo wlan1

iface lo inet loopback

iface default inet dhcp

iface WPA_hidden inet static
        address 192.168.1.250
        netmask 255.255.255.0
        network 192.168.1.0
        broadcast 192.168.1.255
        gateway 192.168.1.1

iface wlan1 inet manual
        wpa-driver wext
        wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf

Then, you need to create a configuration file /etc/wpa_supplicant/wpa_supplicant.conf. Its contents typically looks like this:

ap_scan=1
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev

network={
        ssid="MyWifiNet"
        scan_ssid=1
        key_mgmt=WPA-PSK
        proto=WPA
        pairwise=TKIP
        group=TKIP
        psk="WPA password"
        id_str="WPA_hidden"
}

network={
        ssid="linksys"
        key_mgmt=NONE
        wep_key0=e2c45314910abf72e871beda87
        wep_tx_keyidx=0
}

In the example above, the ssid= and psk= lines should to be adjusted for each wireless network. The second nework linksys is an example of WEP networks. Next, run the following command to start a WPA connection to your wireless network.

wpa_supplicant -c /etc/wpa_supplicant.conf -i wlan1 -B

The steps below finalize wirless network setup.

ifconfig wlan0 192.168.1.201 up

route add default gw 192.168.1.1

Additionally, check the contents of /etc/resolv.conf which set up DNS servers.

To Kill WPA_supplicant

To terminate wpa_supplicant, execute wpa_cli and type the following commands:

terminate
quit